Thermal insulation board XPS
Home > Products > Ancillaries > Thermal Insulation Board XPS
Thermal insulation board XPS
Extruded polystyrene thermal insulation board for high mechanical strength and water presence. The product is a hard and waterproof thermal insulation board of extruded polystyrene with a smooth surface on both sides, harmonized with the European Regulation 305/2011 (CPR), which replaced the European Directive 89/106 / EEC and fully complies with the European Standards EN 13164 ( Thermal insulation products for buildings – Industrially produced products from extruded polystyrene (XPS) and EN 13172.
Certified external thermal insulation composite system HYGROSMART® COVER OVER SYSTEM XPS
Features & Benefits
- Excellent thermal insulation.
- High mechanical resistance to compression and tension.
- Waterproof and non-hygroscopic.
- Lightweight and easy to use.
- Vibration resistant.
- Fully recyclable (100%).
- Ecological and user and environment friendly.
- 100% free of CFC chlorofluorocarbons and HCFC hydrochlorofluorocarbons.
- Zero Ozone Depletion Potential (ODP = 0).
- Zero Contribution Potential to Global Warming (GWP = 0).
Recommended For
- Extruded polystyrene hard boards are applied to all types of building structures, even in wet environments and in cases that will carry large compressive or tensile loads.
Explore more case studies
Similar Products
gEOTEXTILE-45 PRESSED
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the spun-lacing process (hydro-entanglement).
gEOTEXTILE-50 PRESSED
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the spun-lacing process (hydro-entanglement).
GEOTEXTILE-50
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the needle punching process.
MOLDING PUR-40
Is a two component, 1/1 mixing ratio, low viscosity cold cast polyurethane elastomer.