MOLDING PUR-80
Home > Products > Ancillaries > Molding Pur-80
MOLDING PUR-80
MOLDING PUR-80 is a two component, 1/1 mixing ratio, low viscosity cold cast polyurethane elastomer. The low viscosity , and the fact that the material is 100% pure resin allows superior handling and excellent imprinting even of the finest detail.
Features & Benefits
- Combines a good pot-life with very fast de-molding times and produces a flexible but durable elastomer.
- The material is 100% solids and therefore molds will not shrink or soften with age.
Recommended For
- Stamp Concrete.
- Art molds.
- Molds from plaster, epoxy, wax.
- Sculptures.
Explore more case studies
Similar Products
gEOTEXTILE-45 PRESSED
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the spun-lacing process (hydro-entanglement).
gEOTEXTILE-50 PRESSED
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the spun-lacing process (hydro-entanglement).
GEOTEXTILE-50
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the needle punching process.
MOLDING PUR-40
Is a two component, 1/1 mixing ratio, low viscosity cold cast polyurethane elastomer.