ACCELERATOR-3000A
Home > Products > Ancillaries > Accelerator 3000A
ACCELERATOR-3000A
ACCELERATOR-3000A is a high technology curing accelerator specifically designed for HYPERDESMO®, HYPERDESMO-LV® and HYPERDESMO®-S. This product has been formulated in order to achieve the best relationship between pot-life and cure speed. Along with improving the dry time of Hyperdesmo range of products, it boosts the mechanical properties, the hardness and chemical resistance of the coating.
Features & Benefits
- Acceleration of HYPERDESMO® range of products curing particularly during winter (low temperature and humidity).
- Bubbling and other surface defects eliminated.
- Thick coat application possible.
- Substantial increase of the film’s thixotropy (aids application on vertical substrates).
- General improvement of the mechanical properties of the final HYPERDESMO® membrane.
- Non- toxic.
Recommended For
- Curing accelerator specifically designed for HYPERDESMO® and HYPERDESMO-LV® and HYPERDESMO®-S.
- Improving the dry time of Hyperdesmo products.
- Boosts the mechanical properties, the hardness and chemical resistance of the coating.
Explore more case studies
Similar Products
gEOTEXTILE-45 PRESSED
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the spun-lacing process (hydro-entanglement).
gEOTEXTILE-50 PRESSED
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the spun-lacing process (hydro-entanglement).
GEOTEXTILE-50
Is a non-woven geotextile, from 100% polyester fibers, manufactured with the needle punching process.
MOLDING PUR-40
Is a two component, 1/1 mixing ratio, low viscosity cold cast polyurethane elastomer.