HYGROSMART® MAK-FLOW
Home > Products > Cementitious > Hygrosmart® - Mak - Flow
HYGROSMART® MAK-FLOW
HYGROSMART® MAK-FLOW is a cement based, one component, highly flowable and shrinkage compensated mortar for structural repairs and anchoring, meeting the requirements of EN 1504-6 and EN 1504-3 (Class R4).
Features & Benefits
- High bending and compressive strength (class R4).
- One component, ready to use.
- Shrinkage compensated.
- Impermeable.
- No bleeding of water or segregation.
- High flow for full compaction.
- Maximum 2.5mm aggregate to improve application and finish.
Recommended For
• Repair mortar on damaged concrete.
• Anchoring.
• Bridges, Tunnels, Buildings.
• Gas or steam turbines, generators, milling machines.
• Stake support.
• Filling of imperfections in concrete elements.
• For exterior and interior use
Explore more case studies
Similar Products
HYGROSMART®
-IMPER-C
Single-component, fiber-reinforced waterproofing mortar with cement, synthetic polymers.
Two-component, 100% solids, spray-applied pure polyurea system.
HYGROSMART®
-IMPER-C-2K-ELASTIC SUPERFAST
Rapid-drying, highly flexible cementitious membrane for waterproofing in all climates.
HYGROSMART®-PLUG
Mix with water for fast-setting, durable water plug. Stops leaks, even under pressure.